These are used for fixing air rods onto the flat roof surfaces and to accommodate tape for the protection system. The threads are suitable for air rods.
These are used for fixing air rods onto the flat roof surfaces and to accommodate circular conductors and Cables to the protection system. The threads are suitable for air rods.
These are used for fixing air rods Horizontally or Vertically and to accommodate circular conductors and cables to the protection system. The threads are suitable for air rods.
Rod Brackets are mainly used where it is not possible to fit a saddle on the roof, so the air rod has to be fitted on the wall or to the side of the building or chimney. The Rod to Tape/Cable Coupling is used to secure air terminal to Tape or Cable.
These are used in conjunction with the Rod Brackets. The air rod is screwed in to the threads provided and the Tape and Cable is secured by the Bolts provided. The threads are suitable for air rods.
Metallic DC Clips are used to secure the flat conductor to the building. It is recommended to use DC Clips at 1 mtr. distance. The Tape fits into the clip and is secured by two counter shunk screws. These clips can be fastened to the building by recommended csk woodscrew 1 1/2" x No 10 plugs.
These are used to flush the tape with building surface. These are fixed using two screws and plugs.
Square tape / Junction Clamps are used for crossing over tapes or for T joints or for making straight through joints in a network or Tapes. These camps can be fastened to the building by recommended csk woodscrew 1½" x No 10 Plugs.
Oblong Test / Junction Clamps are used for straight through tape joints and also used for disconnecting the earthing or Lightning protection system for testing purpose. The tapes can be overlapped and secured by two bolts.